Feeding line wire to the spot welding position by manual
Press the workpiece by cylinder then fed by motor running
Reached to the spot welding system
Cross wire was fed by carriage with sole hopper
Feeding to the position then in the process of welding
Workpiece was holded by holding system
Wire mesh completed
Spot Welding System
Adjusting the up compressed cylinder, electrodes, and fixture based on the wire pitch. Possible individually set welding time and current.
Cross Wire Feeding System
It is auto sole cross wire loading carriage. Carrying a bundle of wires into the carriage by traveler. Integrated with the welding system, it is with the function of auto wire ordering, outputting.
Output Installation
Equipped with servo motor and gripping pliers to adjust the required pitch, carry the welded mesh to next work station.
Controlling System
Equipped with man-machine interface windows based for the use of P.L.C, all the parameters and figures set on the screen. Easy for operators running and maintenance
Application :
Shell structure, wall structure, reinforced concrete road, retaining wall, protection slope, floor, floor boards, successive wall, and so on.
Specification :
Model
Line Wire Length
mm
Cross Wire Length
mm
Wire Diameter
mm
Line Wire Pitch
mm
Cross Wire Pitch
mm
GSA-125
2000~6000
1000~2400
3~6
≧100
≧50
GSA-200
2000~6000
1000~2400
6~10
≧100
≧50
Remark：We can accept customer's special requirements.
FAX:886-4-24061060
